Click To Call(656) 254-6078Click To Get A Free Estimate
Red brick paver walkway leading to a front entry in Wesley Chapel

Deeper reds and browns, held in place

Brick Paver Sealing in Wesley Chapel, FL

A free estimate on brick paver sealing in Wesley Chapel starts with a call to (656) 254-6078.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.25 to $2.50 a sq ft to clean, sand and seal
Call Now(656) 254-6078
Brick pavers

Can a Wesley Chapel contractor seal my brick pavers, and how soon?

Brick paver sealing is available from local contractors across Wesley Chapel, FL, and a reply should come within 1 business day, often much sooner. The free estimate carries no obligation. To describe your bricks, call (656) 254-6078.

Brick tells on itself. When the sun bleaches a red walkway to a dusty orange and the joints drop below the edges, the whole entry looks older than the house. Cleaning, new joint sand and a film-forming sealer restore the tone and tighten the pattern. Walk the property with the contractor and point to the faded spots. To set that up, request a free estimate.

Call (656) 254-6078

What makes sealing brick pavers different?

Brick is fired clay, and it drinks water differently from concrete. A Wesley Chapel sealing company, a Wesley Chapel company, says brick takes a film-forming sealer that locks in color and stabilizes the joints, while concrete suits a penetrating or wet-look film. It also says a breathable urethane lets moisture escape, since a sealer that cannot breathe can leave a milky look. To ask which type your bricks need, call (656) 254-6078.

Mypoolrenovators.com lists polyurethane, satin to gloss, as the pick for brick and busy areas, with about 3 years of life in Florida. It gives 1,200 to 1,800 PSI as the washing range for concrete and brick. Those numbers are starting points, so ask the contractor how a test spot behaves before the full job. To compare options, request a free estimate.

Close view of brick pavers with refilled joints after a wash in Wesley Chapel
Why choose us

Why do brick pavers lose color in Wesley Chapel?

The reasons are sun, rain and shade. Premier Coatings says deep reds and browns can fade in under two years in Wesley Chapel's tropical conditions, and that storm runoff washes out joint sand, leaving gaps, weeds and insect activity. That company says Wesley Chapel's strong sun, frequent rain and algae fade, stain and loosen unsealed pavers. To see how yours has aged, call (656) 254-6078.

Wikipedia puts the area in a humid subtropical climate, and lists 24,256 housing units in 2020, so many brick drives and entries are still young enough to protect rather than rescue. Sealing early keeps more of the original tone. Mention the installation year when you request a free estimate.

Which finish should I choose for brick: natural, wet look or glossy?

Premier Coatings lists natural matte, wet look and glossy, describing wet look as one of the popular choices around Tampa Bay. Natural matte gives a subtle lift with no shine. Wet look deepens reds and browns. Glossy gives a mirror finish that shows tire marks and footprints more. To see all three on a spare corner, call (656) 254-6078.

Rusty's Wesley Chapel page adds that semi-transparent tints can restore or change faded paver color. That choice suits bricks that have gone chalky rather than ones that are just dusty. A shaded entry usually wants a calmer sheen, so say where the sun falls when you request a free estimate.

Pricing

What does brick paver sealing cost in Wesley Chapel?

No page this site reads prices brick alone, so the table builds from the Tampa Bay range that Rusty's Pro Wash & Seal publishes for cleaning and sealing: $1.25 to $2.50 a square foot, with a $500 to $1,000 minimum charge. Its examples are a 250 square foot patio at $500 to $1,000, an 800 square foot pool deck at $1,000 to $2,000 and a 1,000 square foot driveway at $1,250 to $2,500. To turn that into a number for your bricks, request a free estimate.

A Wesley Chapel sealing company says open joints cost more because sand is most of the labor, and that stripping an old coat is quoted separately. Paver Rescue lists releveling sunken pavers, replacing bricks and re-sanding joints as repairs that change the price. Ask for those lines to be itemized, then call (656) 254-6078.

Brick paver areaWhat it fitsRange at $1.25 to $2.50 a sq ft
250 sq ftEntry walk and stoop (published patio example: $500 to $1,000)$312 to $625
500 sq ftCourtyard or front terrace$625 to $1,250
800 sq ftBrick lanai deck (published pool deck example: $1,000 to $2,000)$1,000 to $2,000
1,000 sq ftBrick driveway (published example: $1,250 to $2,500)$1,250 to $2,500

None of the pages this site reads gives a brick-only price. The table applies the Tampa Bay range, which combines washing, joint sand and sealing, to common brick areas and lines them up with Rusty's Pro Wash & Seal examples. Stripping an old coat and resetting loose bricks are priced apart.

Get a Free Estimate

Contractor tapping a rocking brick paver beside a Wesley Chapel front walk
How it works

How does the process work on brick pavers?

A Wesley Chapel sealing company lists five steps: a walk-through, a deep clean, joint sanding, sealing and a final inspection. Premier Coatings starts with a check for stains, damage, joint integrity and prior sealing, then picks the prep. That company says the surface must be dry and free of residue before sealer goes on. To start the first step, call (656) 254-6078.

The sand step carries a choice. One company compacts polymeric sand and mists it lightly, while Premier Coatings uses silica sand and warns that polymeric can crack and trap moisture. Neither is wrong for every yard, so ask which one the quote assumes. When the sand question is answered, request a free estimate.

How often should brick pavers be sealed around Wesley Chapel?

A Wesley Chapel sealing company says reseal every 2 to 4 years depending on exposure, with driveways and pool-area surfaces nearer the short end and shaded, lightly used patios nearer the long end. Premier Coatings recommends maintenance every 12 to 24 months, annual cleaning for shaded or busy areas, and re-sanding every 2 to 3 years or after major storms. To fit your yard to those ranges, call (656) 254-6078.

Sweep and rinse

A Wesley Chapel sealing company suggests a weekly sweep and a monthly rinse with a mild cleaner.

Clean once a year

Premier Coatings recommends annual cleaning for shaded or busy areas.

Refill sand

Re-sanding every 2 to 3 years, or after major storms, keeps the bricks locked.

Watch the beading

Water that sinks in rather than beading is the sign the coat has worn.

What should I ask before I hire for brick paver sealing?

Ask which sealer is used, whether it breathes, which sand fills the joints, how loose bricks are handled and what is itemized. The contractor standards page lists more questions, such as proof of insurance and the rain-day plan. A quote that answers all of them in writing is worth keeping. When you have one, request a free estimate.

Photos

What do sealed brick pavers look like in Wesley Chapel?

Freshly sealed paver driveway as brick work in Wesley Chapel
Sealed paver pool deck as brick work in Wesley Chapel
Sealed paver patio behind the home as brick work in Wesley Chapel
Sealed paver walkway to a front door as brick work in Wesley Chapel
Close view of freshly sealed pavers as brick work in Wesley Chapel
Paver area with one cleaned half beside a dirty half as brick work in Wesley Chapel
Contractor cleaning pavers as brick work in Wesley Chapel
Contractor sealing or sanding pavers as brick work in Wesley Chapel
Questions

Questions about sealing brick pavers in Wesley Chapel

What are the downsides of sealing pavers?

The coat has to be renewed, and a Wesley Chapel sealing company warns that sealer which cannot breathe can leave a milky haze. A glossy finish can feel slick when wet. On brick, a coat also changes the look, so a test patch is worth asking about.

How much does it cost to install pavers in Florida?

Installing brick pavers is a different trade from sealing, and no page this site reads publishes an install price. Sealing runs $1.25 to $2.50 a square foot in Tampa Bay by Rusty's Pro Wash & Seal. An installer is the one to quote a new patio.

Is it better to spray or roll paver sealer?

Contractors vary. Premier Coatings describes a flood coat that saturates the surface and reaches the joints, and mypoolrenovators.com prefers two thin coats to one heavy one. Ask which method suits the brick and how pooling in low spots is avoided.

What is the average lifespan of a paver driveway?

No page this site reads gives a lifespan for the pavers themselves. The coat on top is easier to date: a Wesley Chapel sealing company says driveways in daily sun want sealing every 2 to 3 years, and Premier Coatings recommends upkeep every 12 to 24 months.

Does brick need a different sealer from concrete pavers?

Often yes. A Wesley Chapel sealing company says brick takes a film-forming sealer that locks in color and stabilizes the joints, while concrete suits a penetrating or wet-look film. Mypoolrenovators.com lists polyurethane for brick and high-traffic areas.

Why does my brick paver turn red or brown and then fade?

Sun breaks down the surface color. Premier Coatings says deep reds and browns can fade in less than two years in Wesley Chapel, and that company says UV bleaches the surface and leaves chalky tones that a color-enhancing sealer can improve.

What is the white haze on my brick pavers?

Two causes show up in sources. A Wesley Chapel sealing company says milky haze comes from a sealer that traps moisture, and Rusty's says efflorescence is a mineral haze that can build faster around saltwater pools. A contractor can tell which one it is.

Is polymeric sand or regular sand used in brick joints?

Contractors disagree. A Wesley Chapel sealing company uses polymeric sand that is compacted and lightly misted, while Premier Coatings says it uses silica sand and avoids polymeric because it can crack and trap moisture. Ask which sand the quote includes.

Can loose or rocking bricks be fixed during sealing?

They have to be fixed first. Premier Coatings says it resets rocking bricks and levels low spots as part of maintenance, and Paver Rescue lists releveling sunken pavers and replacing bricks as repairs that raise the cost.

What other services pair with brick paver sealing?

Brick often needs a clean, a stain treatment or a reset before the coat. The guides below cover each, and (656) 254-6078 connects you with a contractor.

Ready to refresh the brick? Start with a call

Describe the walk, drive or courtyard and how the color has changed. A local contractor answers inside 1 business day, often far sooner, and pricing the job costs nothing.

Call (656) 254-6078

Free, no obligation